Xhnotion Temperature Controller Medium Cooler Vortex Tube with Cold Air

Specification

Model

1. Vortex tube is connected to the air tube.
2. Cold Air Inlet is turned to the items cooled.
3. Compressed air supply is connected to the inlet with a pressure of 4-9 Bar.
4. Use ball valve to control on and off of air supply.
5. Firstly, unscrew 1/8"BSPT seal screw on the end of gun, and then use a slot screwdriver to rotate the position with clockwise to increase cooling capacity, and vice versa.
Note: Don't screw too tight ! Otherwise, it cannot achieve cooling effect.

Applications

1. Widely used in milling, drilling, turning and other metalworking operations
2. Machining of plastics, composites, wood and other materials
3. Surface grinding, drill and tool sharpening
4. CNC routers, blades and band saws
5. Spot cooling of parts, molds and assemblies
6. Industrial sewing and textiles
7. Setting hot melts and adhesives










Troubleshooting & Maintenance

If Cold Air Gun dose not perform properly, check for these common problems:

1. Inlet Pressure.
Low inlet pressure supply will cause poor performance.
(standard pressure of the cooling gun is 6.9 Bar)
Usually compressed air does not use only one tool or device, so the pressure and flow rate of the terminal will be reduced.
2. The inner diameter of the compressed air pipe is not large enough, resulting in low pressure supply.
3. The internal diameters of various fittings of compressed air are smaller than the internal diameter of the pipes, so the pressure will lost in many places and the flow rate will be reduced.
4. Pipes or fittings are leaky
5. Inlet Temperature.
A Cold Gun provides a temperature drop from supply air temperature. In some cases, the supply air is warmer than ambient air due to compressed air lines running across ceilings, near furnaces, direct sun, etc. In this case, the cold air may be warmer than anticipated and adequate refrigeration may not be available for the application.
6. Back Pressure.
The performance of a Cold Gun deteriorates with back pressure on the cold end exhaust. Use only the flexible segmented hose included with the Cold Gun System.
7. No Cold Flow.
If the filter is not drained regularly, water may overflow into the Cold Gun and cause internal freezing. This can reduce or even stop cold air flow. Drain the filter often, or crack open for a small continuous air bleed. If internal freezing occurs, any one of the following will correct the problem:


Solutions

1.Please increase the supply of compressed air.
2.For the compressed air input hose, please use 10-12 mm. If you use a suitable fittings, it will increase the flow of compressed air.
3.Please check whether the pipe system is leaking.
4.Blow air (use an air gun) into the cold muffler with the Cold Gun off.
5. Turn the Cold Gun off for a few minutes.
6. Put a dryer on the compressed air supply.
Note: The high temperature of the hot air end is normal, but please take care to prevent accidents.
When the hot air has not been discharged, part of the heat has been transferred to the vortex tube, so the temperature is not high after being discharged from the gun body, and it does not harm to the human body.















Packing & Shipping

Packing:
Plastic Box + Carton Box
Custom packaging are available, XHnotion brand packaging are available

Shipping:
Method: Air, Sea, Courier
Export port: Ningbo or Shanghai, China
Delivery time: 3 days to 30 days depends on actual orders.
Express: TNT, UPS, DHL, FedEx, SF Express.

XHnotion originate from notion between pneumatic power and human.
(X stands for winds, H stands for human)

In Chinese, XHnotion stands for 'we do, we promise'  we read it 'X-notion'.
The company XHnotion Pneumatic was founded in 2007 and has developed with a steadily growing success to a reliable partner for international established clients.

This success of the company XHnotion Pneumatic is based on:

High class quality standard

Customer satisfaction

Fair price policy

Flexibility

The high-class quality standard of the products of company XHnotion is reflected in our quality management system, certificated ISO 9001:2008. And we got CE, RoHS, REACH certificate for international market.

XHnotion Pneumatic manufactures below products:

Pneumatic Components: air cylinder, solenoid valve, FRL

Solenoid Valve: standard solenoid valve, multipurpose solenoid valve, pneumatic angle valve

Pneumatic Fittings: plastic pneumatic fittings, mental pneumatic fittings, pneumatic muffler, water push in fittings

Air Gun & Couplers: pneumatic couplers, air guns, air tool kits

Air Hoses: air tubing, PTFE tubes, tube cutter, pipes

Why Choose US?

1. We offer one stop solution.
2. We have molds workshop, die-casting workshop, CNC workshop, plastic injection workshop to
   make sure each part exactly as the drawing and good function.
3. We will reply you within 24 hours.
4. Whatever quantity you are requesting, we always offer you the best quality.
5. 3D drawing, CAD drawing service for custom fittings, hose, valve, cylinder.










FAQ

Payment Terms:
We accept T/T, L/C, Paypal, Western Union,etc.

Samples Policy:
For regular item, samples against your courier account or you pick up from us.
For custom items, we will discuss by email.

Return Policy:
We assure you 1 year policy after shipment.
If there is any problem during this period, please contact us for support.