2 Position 3 Way Pilot Mini Solenoid Valve for LED Sorting Machine Supplier
Product Description
FEATURES
5. Multi-specifications & All models
Super safe even in the situation of 24-hour continuous work and 100% on-load factor.
HOW TO ORDER
MANIFOLD OVERALL DRAWING
Manifold For One Valve Manifolds For N Valves
INSTALLATION DRAWING
SPECIFICATIONS
RECOMMENDED PRODUCTS
• Characteristics of Large Flow Type
Large Flow Rate: The flflow rate has promoted 50% above on the basis of the standard type, can better meet your needs.
Energy-saving and Low Temperature Rise: The power only reaches to 0.6W and the temperature rise is very low even in an energized state for a long time.
• Characteristics of the Energy-saving Type
Energy saving and low temperature rise: The power only reaches to 0.3W and the temperature rise is very low even in an energized state for a long time.
Under the energ-saving type, it can be divided into AC type and direct exhaust type.
GENERAL DATA
| Model | XV10 |
| Operation Type | 3/2 N.C.; 3/2 N.O.; 2/2 N.C. |
| Working Medium | Filtered Air/Inert gases |
| Ambient Temperature | -10~80 ºC |
| Working Pressure | 0-7bar |
| Orifice size | φ0.75mm(P),/φ1.0mm(R) |
| Flow rate at 6 bar(Δp1bar) | 16NL/min(P1→P2), 23NL/min(P2→P3) |
COIL DATA
| Electrical Connector | Vertical type(L)/Horizontal type(M)/Direct line type(G) |
| Stand Voltage | DC24V/12V/6V/3V; AC220V/110V |
| Power | 1W/1.2W double power |
| Insulation | H Class |
| Service life | > 50 million times |
| Duty Cycle | ED 100% |
| Max Operating Frequency | 30Hz |
| Operating Voltage Tolerance | +/- 10% |
| Response Time | Less than 10ms |
| Degree of pretection | IP65 |
ADVANTAGE
1) Valve body is machined by Japan automatic CNC to make sure all the dimensions accurate.
2) Aluminum Surface is polished and hard anodized.
3) To import Germany grease to provide firm less-friction support
4) O-ring is imported from Taiwan.
5) 100% leakage testing under low pressure and high pressure.
6) 1 year quality assurance after shipment.
7) After sales technique support
Note：Do not reverse the direction when the plug line accesses to the circuit, the red wire should be connected to the positive and the black is connected to the negative.
WORKSHOP SHOW